Print
Email
Part number: PF567200
Dow SYLGARD™ 567 Primerless Silicone Encapsulant Black is a two component material that is used in potting applications for automotive assemblies, power supplies, high voltage resistor packs, LED lighting, industrial controls, and connectors. It offers unprimed adhesion, heat curing, flowability, minimal shrinkage, low viscosity, and good dielectric properties. 200 mL Cartridge.
This is a Dow product repackaged by KitPackers, an authorized repackager of Dow.
Please note mixer will not be shipped with this product. Review related products below and purchase separately.
| Typical Use: | Low cost primerless adhesion; encapsulation, protection of electrical/electronic devices. |
| Brand: | SYLGARD |
| Color: | Black |
| Components: | 2 part |
| Cure System: | Heat |
| Cure Time: | 120min @ 100 °C; 60min @ 125 °C; 15min @ 150 °C |
| Dielectric Strength: | 525 V/mil |
| Hardness: | 42 A |
| Key Specifications: | MIL-PRF-23586F (Grade B2), Type I, Class IV, QPL, UL 94 V-0 If you require manufacturer certification to a certain spec, please request a quote as additional fees may apply. Ellsworth Adhesives is an ISO-9001 registered and AS9120 compliant distribut |
| Mix Ratio: | 1:1 by volume; 1:1 by weight |
| Service Temperature: | -45 to 200 °C |
| Shear Strength: | 140 |
| Specific Gravity: | 1.23 |
| Thermal Conductivity: | 0.3 W/mK |
| Viscosity: | 1,540 |
| Volume Resistivity: | 2.1 x 10^15 ohm-cm |
| Working Time: | >3d @ room temperature |
-
$105.50 ($2.11 each)Sold as a pack (50/pk).Display Quantity PricingPart #: EA187-48