ELANTAS PDG CONATHANE EN-2523 Polyurethane Casting System Black is a two component, filled system that is used for potting electrical assemblies that are exposed to extreme environments and thermal shock. It cures at room to elevated temperatures and offers good electrical properties, low exotherm, low shrinkage, and low stresses. It is resistant to salt water, aliphatic hydrocarbons, mild acids and bases. 1 gal Kit.
Typical Use: | CONATHANE EN-2523 is particularly recommended for potting electrical and electronic devices that are subjected to conditions of extreme thermal shock, and must also withstand exposure to adverse environments. |
Brand: | CONATHANE |
Color: | Black |
Components: | 2 part |
Cure System: | Room Temperature/Heat |
Cure Time: | 7d @ 25 °C; 16h @ 80 °C |
Dielectric Strength: | >400 V/m |
Elongation: | 50% |
Flash Point: | Part A: 199 °C; Part B: >100 °C |
Hardness: | 50 D |
Mix Ratio: | 20:100 by weight |
Specific Gravity: | Mixed: 1.44 @ 25 °C |
Tensile Strength: | 1,600 |
Thermal Conductivity: | 4.5 x 10^-4 |
Viscosity: | Mixed: 2,800 @ 25 °C |
Volume Resistivity: | 3.4 x 10^13 ohm-cm @ 25 °C |
Working Time: | 50min @ 25 °C |