Print
Email
Part number: EP691F CLEAR - A GL
Manufacturer SKU: EP691F CLEAR A GL
ResinLab EP691F Clear is a two component, room temperature or heat curing, epoxy encapsulant that is used for medium to large castings and filling voids. It is electronic grade, rigid, free flowing, and has good air release and wetting properties. It is resistant to bases, acids, water, and most organic solvents. Part A, 1 gal Pail.
| Typical Use: | Designed for medium to large castings. |
| Chemical Composition: | Epoxy |
| Color: | Clear |
| Components: | 2 part |
| Cure System: | Room Temperature/Heat |
| Cure Time: | 24 to 48h @ room temperature; 2h @ 65 °C; 1h @ 100 °C |
| Dielectric Strength: | 550 V/mil |
| Elongation: | 4.5% |
| Flash Point: | 252 °C |
| Hardness: | 80 D |
| Mix Ratio: | 3.13:1 by weight; 2.55:1 by volume |
| Service Temperature: | -40 to 150 °C |
| Shear Strength: | 2,000 |
| Specific Gravity: | Part A: 1.16; Mixed: 1.10 |
| Tensile Strength: | 8,300 psi |
| Viscosity: | Part A: 14,000; Mixed: 700 |
| Volume Resistivity: | 3.16 x 10^16 ohm-cm |
| Working Time: | 2h |
-
$1,353.64 ($338.41 each)Sold as a pack (4/pk).Display Quantity PricingPart #: EP691F CLEAR - B GL -
$312.17Display Quantity PricingPart #: EP1121 CLEAR A GL -
$1,215.24 ($303.81 each)Sold as a pack (4/pk).Display Quantity PricingPart #: EP1282 CLEAR - A GL -
$1,041.48 ($260.37 each)Sold as a pack (4/pk).Display Quantity PricingPart #: EP965 CLEAR - A GL -
