Print
Email
Part number: EP1295 BLACK - A PL
We have been informed by the vendor that this item is discontinued and no longer available. Please contact your Ellsworth Customer Service Representative for assistance.
ResinLab EP1295 Black is a two component, room temperature or heat curing, flame resistant epoxy casting system that has good air release, free flow, halogen free, and medium viscosity. It is resistant to salt solutions, water, organic and inorganic solvents. Part A, 5 gal Pail.
| Typical Use: | Gives very good resistance to water, salt spray, inorganic acids and bases and most organic solvents. It cures quickly at room temperature to a tough, semi-rigid polymer. It has good wetting and adhesion to most surfaces. |
| Chemical Composition: | Epoxy |
| Color: | Black |
| Components: | 2 part |
| Cure System: | Room Temperature/Heat |
| Cure Time: | 16 to 24 h @ 25 °C; 3h @ 65 °C; 1h @ 100 °C |
| Dielectric Strength: | 410 V/mil |
| Elongation: | 14% |
| Flash Point: | >149 °C |
| Hardness: | 58 D |
| Mix Ratio: | 1:1 by volume; 1.04:1 by weight |
| Service Temperature: | -40 to 150 °C |
| Shear Strength: | 1,400 |
| Specific Gravity: | Part A: 1.50; Part B: 1.44; Mixed: 1.47 |
| Tensile Strength: | 900 psi |
| Thermal Conductivity: | 0.36 W/mK |
| Viscosity: | Part A: 11,000; Part B: 11,000; Mixed: 11,000 |
| Volume Resistivity: | 1.23 x 10^12 ohm-cm |
| Working Time: | 10min |
-
Part #: EP1295 BLACK - B PL -
$708.33Display Quantity PricingPart #: EP965 BLACK - A PL -
Part #: EP1121 BLACK - A PL -
$814.01Display Quantity PricingPart #: EP1282 BLACK - A PL -
