Print
Email
Part number: EP1295 BLACK 400ML
We have been informed by the vendor that this item is discontinued and no longer available. Please contact your Ellsworth Customer Service Representative for assistance.
ResinLab EP1295 Black is a two component, room temperature or heat curing, flame resistant epoxy casting system that has good air release, free flow, halogen free, and medium viscosity. It is resistant to salt solutions, water, organic and inorganic solvents. 400 mL Cartridge.
| Typical Use: | Gives very good resistance to water, salt spray, inorganic acids and bases and most organic solvents. It cures quickly at room temperature to a tough, semi-rigid polymer. It has good wetting and adhesion to most surfaces. |
| Chemical Composition: | Epoxy |
| Color: | Black |
| Components: | 2 part |
| Cure System: | Room Temperature/Heat |
| Cure Time: | 16 to 24h @ 25 °C; 3h @ 65 °C; 1h @ 100 °C |
| Dielectric Strength: | 410 V/mil |
| Elongation: | 14% |
| Flash Point: | Part A: >149 °C; Part B: >93 °C |
| Hardness: | 58 D |
| Mix Ratio: | 1:1 by volume; 1.04:1 by weight |
| Service Temperature: | -40 to 150 °C |
| Shear Strength: | 1,400 |
| Specific Gravity: | Part A: 1.50; Part B: 1.44; Mixed: 1.47 |
| Tensile Strength: | 900 psi |
| Thermal Conductivity: | 0.36 W/mK |
| Viscosity: | Part A: 11,000; Part B: 11,000; Mixed: 11,000 |
| Volume Resistivity: | 1.23 x 10^12 ohm-cm |
| Working Time: | 10min |
-
$107.23Display Quantity PricingPart #: EA200/400M -
-
-
Part #: EP1056LV BLACK 400ML -
-
Part #: EP1056LC BLACK 400ML