ResinLab EP1282 Epoxy Encapsulant Clear 50 mL Cartridge

Part number: EP1282 CLEAR 50ML
ResinLab EP1282 Epoxy Encapsulant Clear 50 mL Cartridge
Quantity Price
1-3 $51.39 51.390000000 USD New Available EP1282 CLEAR 50ML
4-34 $29.08 29.080000000 USD New Available EP1282 CLEAR 50ML
35+ $25.44 25.440000000 USD New Available EP1282 CLEAR 50ML
In stock. We are currently experiencing delays from this supplier. Lead times may vary as product becomes available. Non-returnable product. Canceled orders may incur a fee at the supplier's discretion.

ResinLab EP1282 Clear is a two component, room temperature or heat curing, unfilled, flame resistant, epoxy encapsulant that is used for medium castings. It offers good wetting, semi-rigid polymer, high gloss surface, good thermal shock and cycling properties. It is resistant to bases, acids, water, and most organic solvents. 50 mL Cartridge.

ResinLab EP1282 Clear is a two component, room temperature or heat curing, unfilled, flame resistant, epoxy encapsulant that is used for medium castings. It offers good wetting, semi-rigid polymer, high gloss surface, good thermal shock and cycling properties. It is resistant to bases, acids, water, and most organic solvents. 50 mL Cartridge.
Typical Use: Designed for medium sized castings.
Chemical Composition: Epoxy
Color: Clear
Components: 2 part
Cure System: Room Temperature/Heat
Cure Time: 24 to 48h @ 25 °C; 1h @ 65 °C; 20min @ 100 °C
Dielectric Strength: 778 V/mil
Elongation: 56%
Flash Point: Part A: >252 °C; Part B: >93 °C
Hardness: 70 D
Mix Ratio: 1:1 by volume; 1.17:1 by weight
Service Temperature: -40 to 150 °C
Shear Strength: 1,500
Specific Gravity: Part A: 1.14; Part B: 0.98; Mixed: 1.06
Tensile Strength: 2,400 psi
Thermal Conductivity: 0.2 W/mK
Viscosity: Part A: 6,000; Part B: 2,000; Mixed: 3,000
Volume Resistivity: 1.32 x 10^14 ohm-cm
Working Time: 1h

 

This site uses cookies

We use cookies to provide you with the best possible experience. By using this site, you accept our terms of service and use of cookies.