Print
Email
Part number: EP1121 CLEAR 50ML
ResinLab EP1121 Clear is a two component, room temperature curing, unfilled epoxy encapsulant that is used for medium to large castings and penetrating circuitry. It has flexibility, low viscosity, good wicking, good air release, excellent thermal shock and cycling properties. It is resistant to most organic solvents and water. 50 mL Cartridge.
| Typical Use: | Designed for small to medium sized castings. |
| Chemical Composition: | Epoxy |
| Color: | Clear |
| Components: | 2 part |
| Cure System: | Room Temperature/Heat |
| Cure Time: | 24 to 48h @ 25 °C; 2h @ 65 °C; 30min @ 100 °C |
| Dielectric Strength: | 410 V/mil |
| Elongation: | 80% |
| Flash Point: | >93 °C |
| Hardness: | 65 D |
| Mix Ratio: | 1.05:1 by volume; 1.20:1 by weight |
| Service Temperature: | -40 to 150 °C |
| Shear Strength: | 1,200 |
| Specific Gravity: | Part A: 1.11; Part B: 0.96; Mixed: 1.04 |
| Tensile Strength: | 1,500 psi |
| Thermal Conductivity: | 0.1 W/mK |
| Viscosity: | Part A: 2,500; Part B: 4,200; Mixed: 3,800 |
| Volume Resistivity: | 8 x 10^14 ohm-cm |
| Working Time: | 20min |
-
$30.61Display Quantity PricingPart #: EA51-1 TO 1 / 2 TO 1 -
$181.94Display Quantity PricingPart #: EA50P -
$327.39Display Quantity PricingPart #: EDS408M -
$80.00 ($1.60 each)Sold as a pack (50/pk).Display Quantity PricingPart #: EAMAH06-21S -
$65.00 ($1.30 each)Sold as a pack (50/pk).Display Quantity PricingPart #: EAMAQ05-24LS -
$46.73Display Quantity PricingPart #: EP965 CLEAR 50ML -
-
$51.39Display Quantity PricingPart #: EP1282 CLEAR 50ML