ResinLab EP1121 Epoxy Encapsulant Black 400 mL Cartridge

Part number: EP1121 BLACK 400ML
ResinLab EP1121 Epoxy Encapsulant Black 400 mL Cartridge

Due to raw material shortages, this product is unavailable to purchase on the web. Please contact your Ellsworth Customer Service Representative to confirm availability and delivery time.

Call Us

Call Us
Contact customer service at 877-454-9224.

Email Us

Email Us
Email us for product availability.

 

ResinLab EP1121 Black is a two component, room temperature curing, unfilled epoxy encapsulant that is used for medium to large castings and penetrating circuitry. It has flexibility, low viscosity, good wicking, good air release, excellent thermal shock and cycling properties. It is resistant to most organic solvents and water. 400 mL Cartridge.

<p>ResinLab EP1121 Black is a two component, room temperature curing, unfilled epoxy encapsulant that is used for medium to large castings and penetrating circuitry. It has flexibility, low viscosity, good wicking, good air release, excellent thermal shock and cycling properties. It is resistant to most organic solvents and water. 400 mL Cartridge.</p>
Typical Use: Designed for small to medium sized castings requiring good thermal shock and low stress.
Chemical Composition: Epoxy
Color: Black
Components: 2 part
Cure System: Room Temperature/Heat
Cure Time: 24 to 48h @ 25 °C; 2h @ 65 °C; 30min @ 100 °C
Dielectric Strength: 410 V/mil
Elongation: 80%
Flash Point: >93 °C
Hardness: 65 D
Mix Ratio: 1:1 by volume; 1.15:1 by weight
Service Temperature: -40 to 150 °C
Shear Strength: 1,200
Specific Gravity: Part A: 1.12; Part B: 0.97; Mixed: 1.05
Tensile Strength: 1,500 psi
Thermal Conductivity: 0.1 W/mK
Viscosity: Part A: 2,500; Part B: 4,200; Mixed: 3,800
Volume Resistivity: 8 x 10^14 ohm-cm

 

This site uses cookies

We use cookies to provide you with the best possible experience. By using this site, you accept our terms of service and use of cookies.