Print
Email
Part number: 170 B MIL-PRF-23586 4.9KG
Manufacturer SKU: 4017135
| Quantity | Price |
|---|---|
| 1 | $337.66 |
| 2-3 | $308.41 |
| 4+ | $301.65 |
In stock. We are currently experiencing delays from this supplier. Lead times may vary as product becomes available.
Dow SYLGARD™ 170 Silicone Elastomer is a two component, room temperature and heat curing general purpose encapsulant. It is often used for power supplies, sensors, amplifiers, industrial controls, and transformers. It also offers rapid, versatile cure processing controlled by temperature and can be considered for uses requiring added flame resistance and MIL Spec applications. Part B, 4.9 kg Pail.
| Typical Use: | General potting applications: power supplies, connectors, sensors, industrial controls, transformers, amplifiers, high voltage resistor packs, relays. |
| Brand: | SYLGARD |
| Color: | Off-White |
| Components: | 2 part |
| Cure System: | Room Temperature/Heat |
| Cure Time: | 24h @ 25 °C; 25min @ 70 °C; 15min @ 85 °C; 10min @ 100 °C |
| Dielectric Strength: | 19 kV/mm |
| Flash Point: | >101.1 °C |
| Hardness: | 40 A |
| Key Specifications: | MIL-PRF-23586F (Grade B2), UL 94 V-0 If you require manufacturer certification to a certain spec, please request a quote as additional fees may apply. Ellsworth Adhesives is an ISO-9001 registered and AS9120 compliant distributor. |
| Mix Ratio: | 1:1 |
| Service Temperature: | -45 to 200 °C |
| Specific Gravity: | Part B: 1.33 @ 25 °C; Mixed: 1.38 |
| Thermal Conductivity: | 0.39 W/mK |
| Viscosity: | Part B: 2,500; Mixed: 3,400 |
| Volume Resistivity: | 2.3 x 10^13 ohm-cm |
| Working Time: | 15min @ room temperature |
-
$337.66Display Quantity PricingPart #: 170 A MIL-PRF-23586 4.9KG