Print
Email
Part number: EP1296 - A GL
ResinLab EP1296 Black is a two component, room to elevated temperature curing, highly filled casting resin that is used for applications that require low CTE, low shrinkage, and good thermal conductivity. It is thixotropic, minimizes wear, and contains fillers. Pot life: 1 hour. Part A, 1 gal Pail.
| Typical Use: | Designed for applications requiring good thermal conductivity, low shrinkage and a low CTE. |
| Chemical Composition: | Epoxy |
| Color: | Black |
| Components: | 2 part |
| Cure System: | Room Temperature/Heat |
| Cure Time: | 24 to 72h @ 25 °C; 1h @ 60 °C; 15min @ 100 °C |
| Dielectric Strength: | 400 V/mil |
| Elongation: | 7% @ break |
| Hardness: | 80 D |
| Mix Ratio: | 1:1 by volume; 105:100 by weight |
| Shear Strength: | 2,000 |
| Specific Gravity: | Part A: 1.59; Part B: 1.48; Mixed: 1.54 |
| Tensile Strength: | 2,000 psi |
| Thermal Conductivity: | 0.63 W/mK |
| Viscosity: | Part A: 12,000; Part B: 8,500; Mixed: 7,000 |
| Volume Resistivity: | 2.4 x 10^13 ohm-cm |
-
$1,455.16 ($363.79 each)Sold as a pack (4/pk).Display Quantity PricingPart #: EP1296 - B GL -
-
$239.77Display Quantity PricingPart #: EP750 CLEAR - A GL -
