Print
Email
Part number: EP11HTFS GRAY 50ML
ResinLab EP11HTFS Gray is a two component, room temperature and heat curing, filled epoxy that is used for bonding plastics and metal. It is semi-rigid, thixotropic, non-sagging, and resistant to cryogenic temperatures, impact, vibration, salt solutions, and water. This is the fast setting version of EP11HT. 50 mL Cartridge.
| Typical Use: | Ideal for bonding metals and plastics. Non-sag paste for large gap fill or vertical surfaces. |
| Chemical Composition: | Epoxy |
| Color: | Gray |
| Components: | 2 part |
| Cure System: | Room Temperature/Heat |
| Cure Time: | 24 to 72h @ 25 °C; 2h @ 65 °C |
| Dielectric Strength: | 410 V/mil |
| Elongation: | 1% to 2% @ break |
| Flash Point: | Part A: >93 °C; Part B: >100 °C |
| Hardness: | 85 D |
| Mix Ratio: | 1:1 by volume; 1:1 by weight |
| Service Temperature: | -40 to 150 °C |
| Shear Strength: | 2,300 |
| Specific Gravity: | Mixed: 1.28 |
| Tensile Strength: | 7,000 psi |
| Viscosity: | Mixed: 750,000 |
| Volume Resistivity: | 8 x 10^14 ohm-cm |
| Working Time: | 30 to 40min |
-
$30.61Display Quantity PricingPart #: EA51-1 TO 1 / 2 TO 1 -
$181.94Display Quantity PricingPart #: EA50P -
$327.39Display Quantity PricingPart #: EDS408M -
$65.00 ($1.30 each)Sold as a pack (50/pk).Display Quantity PricingPart #: EAMAQ05-24LS -
$80.00 ($1.60 each)Sold as a pack (50/pk).Display Quantity PricingPart #: EAMAH06-21S -
$68.36Display Quantity PricingPart #: EP1026HP 50ML -
$25.86Display Quantity PricingPart #: EP1290 GRAY 50ML -
$41.23Display Quantity PricingPart #: EP750 CLEAR 50ML -
$658.60 ($65.86 each)Sold as a pack (10/pk).Display Quantity PricingPart #: EP1026T3 50ML
