Print
Email
Part number: EP11HT GRAY - A GL
Manufacturer SKU: EP11HT GRAY A GL
ResinLab EP11HT Gray is a two component, room temperature and heat curing, filled epoxy that is used for bonding plastics and metal. It is semi-rigid, thixotropic, non-sagging, and resistant to cryogenic temperatures, impact, vibration, salt solutions, and water. Part A, 1 gal Pail.
| Typical Use: | Ideal for bonding metals and plastics. Non-sag paste for large gap fill or vertical surfaces. |
| Chemical Composition: | Epoxy |
| Color: | Gray |
| Components: | 2 part |
| Cure System: | Room Temperature/Heat |
| Cure Time: | 24 to 48h @ room temperature; 2h @ 65 °C; 20min @ 100 °C |
| Dielectric Strength: | 410 V/mil |
| Elongation: | 2.8% |
| Flash Point: | >93 °C |
| Hardness: | 80 D |
| Mix Ratio: | 1:1 by volume; 1:1 by weight |
| Service Temperature: | -40 to 150 °C |
| Shear Strength: | 2,300 |
| Specific Gravity: | Part A: 1.26; Part B: 1.25; Mixed: 1.25 |
| Tensile Strength: | 5,500 psi |
| Thermal Conductivity: | 0.27 W/mK |
| Viscosity: | Part A: 329,000; Part B: 235,000; Mixed: 300,000 (estimate) |
| Volume Resistivity: | 6.18 x 10^15 ohm-cm @ 20 °C |
-
$1,373.12 ($343.28 each)Sold as a pack (4/pk).Display Quantity PricingPart #: EP11HT GRAY - B GL -
-
$239.77Display Quantity PricingPart #: EP750 CLEAR - A GL -
