ResinLab EP1056LC Black is a two component, room temperature and heat curing, urethane epoxy adhesive that is used for bonding hard to bond substrates and metal. It is thixotropic, non-sagging, and has excellent gap filling abilities. It is resistant to most organic solvents and water. 400 mL Cartridge.
Typical Use: | Designed to give good adhesion to metals and hard to bond surfaces such as PVC. |
Chemical Composition: | Epoxy/urethane |
Color: | Black |
Components: | 2 part |
Cure System: | Room Temperature/Heat |
Cure Time: | 24 to 72h @ 25 °C; 2h @ 65 °C |
Dielectric Strength: | 410 V/mil |
Elongation: | 4% to 8% @ break |
Flash Point: | Part A: >249 °C; Part B: >100 °C |
Hardness: | 80 D |
Mix Ratio: | 2:1 by volume; 245:100 by weight |
Service Temperature: | -40 to 150 °C |
Specific Gravity: | Mixed: 1.1 |
Tensile Strength: | 5,000 psi |
Thermal Conductivity: | 0.16 W/mK |
Viscosity: | Mixed: 165,000 |
Volume Resistivity: | 8 x 10^14 ohm-cm |
Working Time: | 30min |