ResinLab Armstrong™ Epoxy Resin Adhesive A-2 Off-White is a general purpose adhesive that is used for hard to bond surfaces such as wood, cast iron, nylon, acrylics, bronze, steel, titanium, and other rigid materials. It offers versatility, electrical insulation, and low thermal expansion. 1 pt Can.
Activator is needed for application. Please see related products below.
Armstrong™ is a trademark of Henkel and its affiliates in the US and elsewhere, and used under license. Product manufactured under license from Henkel.
Typical Use: | The choice of one of four recommended Activators (A, E, W or H-20) makes it an ideal choice for many applications. |
Brand: | Armstrong |
Chemical Composition: | Epoxy resin |
Color: | Off-White |
Components: | 2 part |
Cure System: | Heat |
Cure Time: | Activator A: 2h @ 73.8 °C; Activator E: 1h @ 93.3 °C; Activator W: 30min @ 93.3 °C; Activator H20: 30min @ 73.8 °C |
Elongation: | Activator A: 1.5%; Activator E: 2.8%; Activator W: |
Flash Point: | >93.3 °C |
Key Specifications: | MCS6061 TY 1 and MS34.40-13 Rev K. If you require manufacturer certification to a certain spec, please request a quote as additional fees may apply. Ellsworth Adhesives is an ISO-9001 registered and AS9120 compliant distributor. |
Mix Ratio: | Activator A: 100:4 by weight; Activator E: 100:6 by weight; Activator W: 100:36; Activator H20: 100:10 by weight; 10:1 by volume |
Shear Strength: | Activator A: 2,900 @ room temperature; Activator E: 2,500 @ room temperature; Activator W: 4,300 @ room temperature; Activator H20: 3,800 @ room temperature |
Specific Gravity: | 1.8 |
Tensile Strength: | Activator A: 3,000 psi; Activator E: 6,570 psi; Activator W: 5,100 psi; Activator H20: 3,800 psi |
Viscosity: | Activator A: 210,000; Activator E: 170,000; Activator W: 130,000; Activator H20: 15,000 |
Working Time: | Activator A: 30min; Activator E: 2 to 3h; Activator W: 1 to 2h; Activator H20: 45 to 90min |