Permabond HM128 Threadlocker Anaerobic Adhesive is a high strength, environmentally friendly adhesive that is used for permanent assembly and prevention of vibration loosening. It fully cures quickly at room temperature to cross-linked plastics, steel, and common bolt platings. It offers corrosion protection, thread lubrication, off-torque control, and environmental resistance. 1 L Bottle.
Typical Use: | Used to seal and prevent vibration loosening of bolts, studs and cap screws where permanent assembly is required. Permabond HM128 replaces lock washers. |
Chemical Composition: | Methacrylate esters |
Color: | Red |
Components: | 1 part |
Cure System: | Anaerobic |
Cure Time: | Full strength: 24h |
Dielectric Strength: | 11 kV/mm |
Flash Point: | >93.3 °C |
Gap Filling: | 0.15 mm |
Shear Strength: | 2,500 |
Specific Gravity: | 1.09 |
Thermal Conductivity: | 0.19 W/mK |
Viscosity: | 500 |
Working Time: | 15min |