Parker Lord Structural Adhesives for Specialty Trucks and Trailers
Many truck and trailer manufacturers are making the switch to adhesives instead of traditional welding and fastening. Lowering fuel cost, wind drag, and weight has become an important component in manufacturing specialty vehicles. Results have shown that structural adhesive bonds are often stronger and more reliable. Parker Lord offers a variety of acrylic, epoxy, and urethane structural adhesives. With help from an industry expert, Ellsworth Adhesives can assist you with product selection and implementing a new production process.
Eliminate Welds & Rivets
Decrease Weight
Save in Build Cost
Increase Strength
Increase Throughput
Let us help you make the switch!
How You Will Save
-
Reduce leakage
-
Improve cycle times
-
Increase service life
-
Increase throughput
-
Reduce labor
-
Decrease gas consumption
-
Reduce weight
Benefits of Adhesives
-
Improved aesthetics
-
Improved strength
-
Multiple cure speeds offered
-
Bond line control
-
Eliminate welds and rivets
-
Better for health and safety
-
Does not require primer or activators
Structural adhesives can be used to configure work truck equipment, trailer assembly, and aftermarket upfitting. Applications can range from panel bonding for trailers, installation of tool boxes in construction trucks, shelf hanging for delivery vehicles, plumbing equipment for firetrucks, to electrical components in utility vehicles.
Applications for Service Trucks
-
1. Sidewall and Panel Bonding
Improve quality by eliminating corrosion and leaks -
2. Roof Bonding
Accelerate assembly times -
3. Seam Sealing
Prevent corrosion and cargo damage -
4. HVAC Units
Bond and seal in one step -
5. Cab and Grill Bonding
Improve aerodynamics and aesthetics -
6. Tailgate Bonding
Increase strength and reduce weight -
7. Floor Bonding
Improve vibration and corrosion resistance -
8. Door and Frame Closures
Improve appearance, stability, and stiffness
Applications for Utility Trailers
-
1. Sidewall Bonding
Fiberglass reinforced plywood, aluminum, and galvanized -
2. Roof Bonding
Fiberglass reinforced plywood, aluminum, galvanized and composites -
3. Front Panel Bonding
Fiberglass reinforced plywood, aluminum, and galvanized -
4. Bonded HVAC Units
Fiberglass reinforced plywood, aluminum, and galvanized
| Products | Description |
| Parker LORD® CoolTherm® SC-1600 Gap Filler | Thermal management within battery module. Low stress, durability, and environmental resistance. |
| Parker LORD® CoolTherm® SC-2000 RW Gap Filler | Thermally conductive gap filler for electronic applications. Reworkable, thixotropic viscosity. |
| Parker LORD® CoolTherm® SC-309 Silicone Encapsulant | Thermally conductive, silicone encapsulant for electrical/electronic applications. Excellent flame retardancy, environmental resistance. |
| Parker LORD® CoolTherm® SC-320 Silicone Encapsulant | Enhanced protection for electronic components, including potting applications. |
| Parker LORD® CoolTherm® TC-2002 Structural Adhesive | Structural adhesive for thermal management. Heat dissipation, electrical insulation. |
| Parker LORD® CoolTherm® UR-2000 Gap Filler | Thermally conductive, urethane gap filler for electronic applications. Excellent flame retardancy, low viscosity. |
| Parker LORD® Sipiol® UV Dielectric Coating | Dielectric coating used on electrically-sensitive substrates. Durable and environmentally friendly. |
| Parker LORD® Maxlok™ MX-T3 Acrylic Adhesive | Metal bonding for standard joint designs. Short working time; medium viscosity. |
| Parker LORD® Maxlok™ MX-T6 Acrylic Adhesive | Metal bonding for standard joint designs. Medium working time; medium viscosity. |
| Parker LORD® Maxlok™ MX-T18 Acrylic Adhesive | Metal bonding for standard joint designs. Long working time; medium viscosity. |
| Parker LORD® 403 Modified Acrylic Adhesive | Metal bonding for standard joint designs. Short working time; high viscosity. |
| Parker LORD® 406 Modified Acrylic Adhesive | Metal bonding for standard joint designs. Medium working time; high viscosity. |
| Parker LORD® 410 Modified Acrylic Adhesive Resin | Metal bonding for standard joint designs. Long working time; high viscosity. |
| Parker LORD® 5206/55GB Acrylic Adhesive | Structural adhesive for cell-to-carrier attachment. Temperature and environmentally resistant. |
| Parker LORD® 7555 A/C Urethane Sealant/Adhesive | Seam sealing and bonding for direct-to-metal. Short working time; high viscosity. |
| Parker LORD® 7610DTM Urethane Sealant/Adhesive | Seam sealing and bonding for direct-to-metal. Long working time. |
| Parker LORD® 810-20GB Acrylic Adhesive | Metal bonding for standard joint designs. Medium working time; medium viscosity. |
| Parker LORD® 850 Acrylic Adhesive w/ Accelerator 25GB | Metal bonding for improved fatigue and impact resistance. Medium working time; high viscosity. |
| Parker LORD® 852 Acrylic Adhesive w/ Accelerator 25GB | Metal bonding for improved fatigue and impact resistance. Long working time; high viscosity. |
Featured Literature
